With Windows 11, users can project videos, images, and web material from one compatible device onto another via the “Wireless Display” function. This function can be added via the Windows Settings app. Although there shouldn’t be any issues installing this feature, some customers have encountered an Install failed error when attempting to install the Wireless Display feature. This post will be helpful if you also encounter the failed wireless display install failed Windows 11 error. Here, we outline procedures and actions to solve the problem in Windows 11.

Steps to Solve Wireless Display Install Failed in Windows 11

Make sure Miracast is supported by your device before looking at the solutions we have listed for you below. A wireless technology called Miracast enables content to be transferred from one screen to another. Before you wirelessly mirror or project to your PC, make sure your gadget is Miracast compatible.

If the device supports Miracast, use the Windows + I hotkey to launch the Settings app and select System settings. Then, see if it is enabled in the Projecting to this PC tab. If this did not take place, the Wireless Display installation might have failed. Other factors may potentially contribute to the Wireless Display installation’s failure. Let’s examine them.

Method 1: Verify the Internet Connection

A working Internet connection is normally needed to install wireless displays on Windows 10. Sometimes users start the installation procedure without first connecting to the internet. Therefore, before starting the process, ensure your internet connection is turned on. You can attempt a different way from this page if you have an internet connection, which isn’t why it failed. Meanwhile, to enable tablet mod, your can do Windows 11 force tablet mode by selecting action center on the taskbar and then select Tablet mode to turn it on or off.

Method 2: Connect to a Different Internet Source

Internet connectivity issues may also contribute to unsuccessful wireless display installations. See if the installation works by switching to a different internet source. If that’s the case, a shaky internet connection contributed to the failure of the Windows 10 wireless display installation.

Method 3: Disable the Metered Connection

You can get the wireless display installation problem if metered connections are enabled in your Network and Internet settings since they are used to restrict how much bandwidth your PC uses. You must ensure that the metered connection is turned off if wireless display installations require extra data capacity. If it isn’t, you’ll have to manually shut it off. To turn off a metered connection, follow these instructions:

1. The Settings app should first be opened by hitting the shortcut key “Windows + I.” Launch the “Network & Internet” category next. Following that, click the ‘Properties’ link next to the internet connection you are now using.
2. Scroll down to the “Metered connection” area of the “Properties” window. Ensure the “Set as the metered connection” option is turned off here. If not, click the toggle button to the left and exit the Settings app.
3. Try installing a wireless display on your PC if the installation difficulty still exists.

Method 4: Install via Command Prompt

If the installation via the Settings app fails, try installing the wireless display via the Command Prompt. According to several users, the wireless display capability can be installed using the command prompt. Therefore, if your settings app crashes Windows 11, you can also try it. The necessary actions and commands are listed below:

1. Open the taskbar search, type cmd, and then select “Run as administrator” at the command prompt to launch the cmd with administrative rights. Type the following command in the Administrator Command Prompt window: DISM /Online /Add-Capability /CapabilityName:App.WirelessDisplay.Connect~~~~0.0.1.0
2. Press Enter once more to execute the command. Installation of wireless displays will start. Both Command Prompt and your Settings app allow you to keep an eye on the progress.

Method 5: Install via Powershell

If you keep getting issues when attempting to install the wireless display functionality through the command prompt or the Settings app, you can try Powershell. To install the wireless display functionality, use the same command you performed in Command Prompt in Powershell. Check out the Powershell instructions for installing wireless displays.

1. Launch Windows Powershell (Admin).
2. The Powershell window will display the same command as the Command Prompt: DISM /Online /Add-Capability /CapabilityName: App.WirelessDisplay.Connect~~~~0.0.1.0 and press Enter. The command will complete the installation of the wireless display feature.

You may easily solve the wireless display install that failed in Windows 11 by carefully observing the techniques listed above. Try using CMD and Powershell if the installation using the settings application fails.

Author Bio:

This is Aryan, I am a professional SEO Expert & Write for us technology blog and submit a guest post on different platforms- Technoohub provides a good opportunity for content writers to submit guest posts on our website. We frequently highlight and tend to showcase guests