Nighthawk Router Unable to Obtain IP Address?
Nowadays, many Nighthawk router users have been reporting that they are experiencing that their Nighthawk router is unable to obtain IP address. And, due to this error, they failed to access Netgear Nighthawk setup page. Are you also among them? If yes, don’t get depressed because this post can help you fix the issue in no time. Just follow the hacks given in this post and we assure you that, by the time you reach the last one, the Netgear Nighthawk router unable to obtain IP address issue will be fixed. Yes, trust us and go through this 5-minute read.
Fixed: Router Unable to Obtain IP Address
Fix 1: Reboot Your Nighthawk Router
Usually, we recommend this first hack to those users who came across any technical-related issue with their Netgear Nighthawk router. Yes, technical glitches also cause Netgear Nighthawk router unable to obtain IP address issue. So, we would like to suggest you do the same with your router.
Follow the guidelines below and know how to give your Nighthawk router a new start:
Step 1: First of all, turn off your Netgear Nighthawk router and unplug it. Once you are done doing that, wait for some time and after that, plug it back in again.
Step 2: Connect your Netgear Nighthawk router to internet modem and see if the issue you are currently experiencing is fixed.
Still the same? Just relax! Without much delay, head over to the second hack. Don’t worry, the issue will be fixed shortly.
Fix 2: Check the Connection Source
Have you connected your Netgear Nighthawk router and internet modem using a wireless source? If yes, then ensure that they are securely connected to the correct network. Apart from that, ensure that you still have data balance in your account. Regarding this, your ISP can help you out. Keep in mind, slow or poor internet range is the biggest cause behind getting Netgear Nighthawk router unable to obtain IP address issue.
This is for those users who have connected their Nighthawk router and internet modem using an Ethernet source. Make sure that the cable has no cuts on it and the connection being established by you is not loose, ok?
Try this fix and you will definitely have a fix for router unable to obtain IP address issue, don’t you? If your answer is a big no, then chances are your Nighthawk router is placed on a bad location. Yes, placement of your router plays a vital role in the well working and good performance of Nighthawk router.
So, what we suggest, simply change the current location of your Netgear Nighthawk router. And, most important thing, do not place your router away from your internet modem, got it? Just place them in close proximity.
Fix 3: Perform Factory Reset
What, are you still going bonkers of Netgear Nighthawk router unable to obtain IP address issue? Why worry then? Try this last hack to make yourself rid of the issue permanently. Yes, Netgear router factory reset! It is one of the most effective remedies to fix many big issues with Nighthawk router apart from the one you are currently experiencing.
Here are the instructions to perform a factory reset process on your Nighthawk router.
Note: It is recommended to perform the factory reset process on your Nighthawk router in the exact given order as provided below. Bear in mind, a wrongly performed reset process will ruin everything.
Step 1: You don’t have to unplug your Nighthawk router. Yes, a continuous power to the router is very important to complete the reset process with ease. But, you have to disconnect the router from your connected devices, including modem.
Step 2: Once you are done doing that, means once you have disconnected your router from the connected devices, locate the reset hole on it.
Step 3: Now, what you have to do is to press the router’s reset hole using a hairpin or any object similar to it.
Step 4: Keep holding it for a couple of minutes, and then release it.
Your Netgear Nighthawk router is successfully reset. Now, you need to set it up again using the manual method, WPS method, or using the instructions provided on the Nighthawk app. To prevent any issues, please ensure that you have downloaded the correct version of the Netgear Nighthawk app as per the device compatibility.
To Sum Up
Netgear Nighthawk router unable to obtain IP address issue has given millions of users across the globe a very bad experience. But, we are not considering you among them because we are sure that the above-mentioned troubleshooting hacks were helpful for you, weren’t they?